Posts Tagged 'american barleywine'

AG#32 – Old Dawg American Barleywine

IMG_2039

This is a re-brew of the American barleywine which I did last year.

Recipe Specifications

Boil Size: 27.92 l
Post Boil Volume: 23.92 l
Batch Size (fermenter): 19.00 l
Bottling Volume: 17.00 l
Estimated OG: 1.090 SG
Estimated Color: 25.9 EBC
Estimated IBU: 137.1 IBUs
Brewhouse Efficiency: 60.00 %
Est Mash Efficiency: 77.8 %
Boil Time: 60 Minutes

Ingredients

1.00 tsp Gypsum (Calcium Sulfate) (Mash 60.0 mins Water Agent
5.600 kg Pale Malt, Maris Otter (5.9 EBC), 71.8 %
0.400 kg Caramel/Crystal Malt – 40L (78.8 EBC), 5.1 %
0.200 kg Wheat Malt, Ger (3.9 EBC), 2.6 %
0.150 kg Biscuit Malt (45.3 EBC), 1.9 %
0.050 kg Caramel/Crystal Malt -120L (236.4 EBC), 0.6 %
0.050 kg Pale Chocolate Malt (591.0 EBC), 0.6 %
1.000 kg Light Dry Extract (15.8 EBC), 12.8 %
22 g Chinook [11.00 %] – Boil 60.0 min, 30.8 IBUs
30 g Centennial [11.00 %] – Boil 30.0 min, 21.5 IBUs
0.350 kg Corn Sugar (Dextrose) [Boil for 20 min], 4.5 %
75 g Cascade [7.80 %] – Boil 15.0 min, 18.1 IBUs
50 g Summit [17.70 %] – Boil 15.0 min, 30.1 IBUs
0.50 Items Whirlfloc Tablet (Boil 10.0 mins)
60 g Cascade [7.80 %] – Steep/Whirlpool  20.0 Hop, 11.4 IBUs
25 g Chinook [13.00 %] – Steep/Whirlpool  20.0 Hop, 8.7 IBUs
25 g Summit [17.70 %] – Steep/Whirlpool  20.0 Hop, 11.8 IBUs
16 g Centennial [11.00 %] – Steep/Whirlpool, 4.7 IBUs
1.0 pkg Safale American  (DCL/Fermentis #US-05) (450ml yeast slurry from Big Dawg)

Mash Schedule: Bubbles’ Single Infusion, Full Body, Batch Sparge
Total Grain Weight: 7.800 kg

Mash In           Add 18.06 l of water at 74.6 C          68.0 C        60 min
Sparge: Batch sparge with 2 steps (Drain mash tun , 16.82l) of 77.0 C water

Mash Day 24/04/2015 – Mashed in at around 75C which I though might be a bit hot, but with the large volume of grain, the lash temperature settled out at 67-68. A little higher than I wanted for this barleywine, but happy enough. Run-off was fairly slow. I also realised that I didn’t have the full kilo of DME that I thought I had!

Brew Day 25/04/2015 – Got an OG of 1.088 – 1.090, so pretty much on target given the large gravity. I was short about 140g of regular DME, so I used some wheat spraymalt I had. It won’t make an difference. I made some last minute additions to the hop bill, based on what I had open in the fridge. I had a small bit of Centennial which I decided to use as a mid-boil addition and then use the rest at flameout. The Chinook I had smelled so good that I had to use a little of that along with the Cascade and Summit. Run off from boiler was an absolute nightmare, despite using my hop bags for the flameout additions. The fermenter is full of cold break and pellet hops. Pitched the yeast slurry and will try to ferment as cold as I can for a few days.

27/04/2015 – Fermentation underway after less than 12 hours. Going like a machine gun now.

17/05/2015 – Aimed for 16.5 litres of bottled beer. Got 18 x 330ml and 21 x 500ml bottles from the batch. primed with 115g of corn sugar (16.5 litres at 2.6 vol). Happy with the bottling session. I opted not to reseed the yeast (out of laziness) and I hope I’m not going to regreat that decision. But I think the carbonation problems I had with the last brew of this beer was mostly due to using carbonation drops and also due to lack of patience. I just need to leave this at conditioning temperature for 2 or 3 weeks. Anyway, the smell from the beer was amazing. It’s so hoppy that there was a very visibile layer of hop oil on top of the beer. A couple of days ago I was alarmed that I wasn’t getting much hop aroma out of the fermenter, but that was due to the blanket of CO2 on the beer. I literally hadn’t touched the fermenter since the wort went in. Can’t wait to sample this. And I’m happy to get at least some of this beer into 330ml bottles. 500ml bottles really are too big for a beer of this strength and intensity.

19/07/2015 – I opened a bottle of this because I was concerned about the carbonation level. I’m happy to say the carbonation is great this time around. The alcohol and hop bitterness are still a little overwhelming, so I’m hoping the hop and malt flavours will be more in focus when fully conditioned. I drank it all, which is probably a good sign.

01/12/2015 – This has improved a lot. I can taste more of the malt and hops. The bitterness is still very assertive, probably still a little bit too much. For a beer that’s almost 10%, it’s quite dry and drinkable. I think another 3 months aging on this will make a huge difference. Lovely hop flavours. Big caramel. Alcohol is quite smooth. Very nice.

16/01/2016 – Lovely head retention, quite hazy but still looks the part. Very nice aroma, citrus hops and dark caramel. So far so good. Flavour is great, big ass hops. Fourth beet of the evening, so probably not detecting any hot alcohols. Bitterness is still very prominent. Could probably use another couple of months aging.

AG#14 – Old Dawg American Barleywine

20140413-141145.jpg

So much for 2014 being the year of the session beer! This is the second barleywine I’ve done in a week! 🙂

This was a spur of the moment brew, because I had a couple of bottles of yeast slurry from the Chasing Tail Pale Ale that I didn’t want to go to waste. I’ve wanted to do a barleywine for ages now, and I figure that if I’m getting my keg system on the go this summer, I’ll have plenty of bottles doing nothing. What better way to utilise them than to start off an archive of “stock” ales. I decided to using the Big Dawg Imperial Amber as the basis for this barleywine. I’ll be using the same amounts of specialty malts, but obviously the gravity will be much higher on this beer, which will necessitate a lot more base malt. The only substitution I’ll be making will be subbing the chocolate malt with the pale version. In order to fit in with style guidelines, I want to make sure I don’t get too much roastiness and keep the dark colour in check.

Recipe

Boil Size: 25.40 l
Post Boil Volume: 23.40 l
Batch Size (fermenter): 19.00 l
Bottling Volume: 17.00 l
Estimated OG: 1.090 SG
Estimated Color: 26.0 EBC
Estimated IBU: 96.3 IBUs
Brewhouse Efficiency: 60.00 %
Est Mash Efficiency: 75.6 %
Boil Time: 60 Minutes

Ingredients

5.600 kg Pale Malt, Maris Otter (5.9 EBC), 71.8 %
0.400 kg Caramel/Crystal Malt – 40L (78.8 EBC), 5.1 %
0.200 kg Wheat Malt, Ger (3.9 EBC), 2.6 %
0.150 kg Biscuit Malt (45.3 EBC), 1.9 %
0.050 kg Caramel/Crystal Malt -100L (197.0 EBC), 0.6 %
0.050 kg Pale Chocolate Malt (591.0 EBC), 0.6 %
1.000 kg Light Dry Extract (15.8 EBC), 12.8 %
35 g Columbus [15.90 %] – Boil 60.0 min, 70.7 IBUs
0.350 kg Corn Sugar (Dextrose), 4.5 %
0.50 Items Whirlfloc Tablet (Boil 15.0 mins)
30 g Cascade [9.20 %] – Boil 15.0 min, 8.5 IBUs
30 g Summit [16.80 %] – Boil 15.0 min, 17.1 IBUs
71 g Cascade [9.20 %] – Boil 0.0 min, 0.0 IBUs
22 g Summit [16.80 %] – Boil 0.0 min, 0.0 IBUs
1.0 pkg Safale American (DCL/Fermentis #US-05) (500ml slurry from Chasing Tail Pale Ale)
Mash Schedule: Bubbles’ Single Infusion, Full Body, Batch Sparge
Total Grain Weight: 7.800 kg
Mash In Add 18.06 l of water at 74.6 C 68.0 C 60 min

Sparge: Batch sparge with 2 steps (Drain mash tun, , 14.30l) of 77.0 C water

Mash Day 20/04/2014 – Mashed at 67.8C, a bit higher than my intended target. But mashed for 90 minutes, and decided to leave the wort in two FVs for boiling the next morning. Wort is an amazing colour, and great aroma. Just a little bit of roast there. Can’t wait to layer some big American hop flavour on top of this monster of a beer.

Brew Day – 21/04/2014 – A LOT of trub into the fermenter. Think I used a good bit more Whirlfloc than usual and ended up with masses of cold break. So it all got stirred up when I was helping it through the hop blocker. I also had very little hops in the boiler because I was using two muslin bags. It might have back-fired on me doing this as there was no hops to filter the break material. Chilled to about 18C before pitching yeast and not only had fermentation kicked off with a few hours, but it’s threatening to escape the fermenter. I probably massively overpitched, but I’m hoping that won’t do any harm in a beer as big as this. Got about 18.5 litres at 1.092, just slightly higher OG than my intended target. Smells great, though I’m concerned about all that trub.

10/05/2014 – Was worried that the fermenter smelled too yeasty, so I took a sample out and tasted. Absolutely bonkers bitterness, massive resiny hop character. Plenty of American hop citrus there, but a little drowned out by the assault of bitterness. I’d planned on dry-hopping, but I didn’t have any Cascade and figured dry-hopping would add very little given the long aging period. Decided to bottle straight away. I had a batch priming solution ready to go and forgot about it! Racked straight into the bottles! So I used carb drops, which will not give the measured level of carbonation I expect these days, but hopefully it will come out well. One carb drop for each 500ml bottle. Got 22 x 500ml bottles from the batch. Recorded a FG of 1.020, which is an excellent level of attenuation, giving an ABV of 9.6%. Even though both my OG and FG figures were just slightly off, my intended ABV was spot-on in the end.

I also racked almost 5 litres into a demi-john and added 15g of American medium-toast oak chips. The oak chips had been sanitised by steaming in a colander for about 10 minutes. I was going to toss them in straight from the bag, but I chickened out. Probably a wise move. The smell from the oak chips was amazing. Can’t wait to do more experiments with oak. Will bottle the oaked version in about 2 weeks time.

13/09/2014 – Thought it might be a bit early for a sample of this, but already it tastes absolutely fantastic. So much for cellaring this, I can’t see it lasting too long. I was concerned that it wouldn’t be dark enough because I subbed the chocolate malt with pale chocolate, but the colour is perfect. Amazing blend of toasty malt and hops. No hot alcohols, but there’s no mistake that it’s a barleywine you’re drinking. I had a bottle of 2011 Bigfoot during the week and the quality of this home brew is right up there with one of the best commercial examples of the style. Very pleased.

18/09/2014 – Opened a bottle of this at a meet this evening which was a little disappointing due to the fact that it was under-carbonated. The low carbonation makes the beer more sweet and cloying. It also lessens the hop impact a bit too. I hope they’re not all like this one! Definitely going to do a re-brew of this in the next few months.

02/11/2014 – Extremely disappointed to find that the oaked version of this beer is absolutely flat as a pancake! And the heartbreaking thing is that the flavour is amazing, at least as far as I can tell in a completely flat beer. The level of oak is really good, and melds well with the hop and dark malt flavours. I don’t really want to just chuck this batch away, so I’m going to attempt to re-seed and maybe even re-carb the oaked portion of the barleywine batch, as well as some of the regular, unoaked barleywine.

24/02/2015 – Quick update on this. Great recipe, great beer, but woefully under carbonated. The key to doing a barleywine like this is getting a good level of carbonation to make the body seem lighter. I ended up dumping all of the oaked batch, because it wasn’t carbonated at all. I’ve dumped a lot of the regular barleywine too – it’s alright for a few sips but quickly becomes overwhelming because of the low carbonation. I think I have a couple of bottle left though, which I’ll use to plan a re-brew of this recipe.


Bubbles Brews Beer!

homebrewing & craft beer

Bubbles’ Twitter Feed